Using EZ-GPS - Quick Guide to Making an FS Flight Plan
|
EZ-GPS lets you fly an Flight Simulator flight plan. Many of you are already familiar with the Flight Simulator Flight Planner. If you know how to make a flight plan, then you can skip this section. This is a step by step example of making a Flight Simulator flight plan that you can use for the Seattle to Portland flight with EZ-GPS. The plan will be for a VFR flight using low-altitude airways. |
|
From the main Flight Simulator menu choose: Flight | Flight Planner |
|
| 1. Choose Departure Location | Seattle-Tacoma Int'l (KSEA) |
| 2. Choose Destination | Portland International (KPDX) |
| 3. Choose flight plan type | VFR |
| 4. Choose routing | Low-altitude airways |
The illustration to the right shows the above entries on the Flight Planner dialog.
|
|
5. Plot flight plan To the right is the route that the Flight Planner has created. Save the route e.g. VFR Seattle-Tacoma Intl to Portland Intl.PLN |
On the above dialog click Find Route
|
| The Flight Simulator flight plan is as follows: |  click to enlarge |
Now you can use this flight plan to see how EZ-GPS can take you effortlessly from Seattle to Portland. Click here to go to Flying an FS Flight Plan. |
|
|
|
